VALQUA No. |
Product Name |
Description |
Application |
Detail |
7041 |
VALFLON Flexible Hose (with Wire Braid) |
PTFE hose, braided with stainless wire and provided with metal connectors at both ends |
Used for absorbing dislocation, angular displacement, and vibration of steam, chemical, gas (non-flammable), and food piping as well as hydraulic machinery |
|
7042-45L |
VALFLON® Lining Pipe (45° Elbow) |
This product is formed by inserting a PTFE or PFA tube into a 45° L-shaped steel pipe then flaring each edge, or by lining a steel pipe elbow with PTFE. |
It is used with lines that use highly corrosive acid/alkali. |
|
7042-90L |
VALFLON® Lining Pipe (90° Elbow) |
This product is formed by inserting a PTFE or PFA tube into a 90° L-shaped steel pipe then flaring each edge, or by lining a steel pipe elbow with PTFE. |
It is used with lines that use highly corrosive acid/alkali. |
|
7042-BF |
VALFLON Lined Pipe (Blind Flange) |
Steel pipe with PTFE or PFA sheet attached to one side flange. |
Used on corrosive acid or alkali lines |
|
7042-C |
VALFLON Lined Pipe (Cross) |
Cross pipe lined with PTFE |
Used on corrosive acid or alkali lines |
|
7042-CR |
VALFLON Lined Pipe (Concentric Reducer) |
Steel pipe equipped with PTFE liner |
Used on corrosive acid or alkali lines |
|
7042-ER |
VALFLON Lined Pipe (Eccentric Reducer) |
Steel pipe equipped with PTFE liner |
Used on corrosive acid or alkali lines |
|
7042-GP |
VALFLON Lined Pipe (Instrument Tee) |
Steel pipe lined with PFA |
Used on corrosive acid or alkali lines |
|
7042-P |
VALFLON Lined Pipe (Straight) |
PTFE or PFA tube is inserted into steel pipe (STPG, SGP, SUS) and its both ends are flared outward |
Used on corrosive acid or alkali lines |
|
7042-RS |
VALFLON Lined Pipe (Reducing Flange) |
Steel pipe equipped with PTFE liner |
Used on corrosive acid or alkali lines |
|
7042-RT |
VALFLON Lined Pipe (Reducing Tee) |
Reducing tee pipe lined with PTFE or PFA |
Used on corrosive acid or alkali lines |
|
7042-S |
VALFLON Lined Pipe (Spacer) |
Steel pipe with PTFE tube inserted and both ends flared outward |
Used on corrosive acid or alkali lines |
|
7042-SG |
Sight Glass |
Steel pipe with PTFE tube lining inside with tempered glass observation window installed to show liquid status. |
This product is used in lines that employ highly corrosive acid and alkali. |
|
7042-ST |
VALFLON Lined Pipe (Tee) |
Tee pipe lined with PTFE or PFA |
Used on corrosive acid or alkali lines |
|
7043-A |
VALFLON Lined Blow-in Pipe (Single Flange type) |
Flanged steel pipe with its inside and outside lined with PTFE tube |
Used for blowing chemical liquid or gas into a reaction oven etc. Used where vibration and bending stress are small. |
|
7043-B |
VALFLON Lined Blow-in Pipe (Double Flange type) |
Flanged steel pipe with its inside and outside lined with PTFE tube |
Used for blowing chemical liquid or gas into a reaction oven etc. Used where vibration and bending stress may occur to some extent. |
|
7043-C |
VALFLON Lined Drip Pipe |
PTFE tube and metal-cored collar combined. PTFE tube and collar machined from PTFE sleeve are combined. |
Used for dripping down chemical liquid etc. to liquid ino a tank. |
|
7046-1 7046-2 |
VALFLON Pliable Hose |
PTFE hose, corrugated into spiral shape
No.7046
-1: no flange
-2: flanges at both ends |
Used for absorbing dislocation and angular displacement of steam, chemical, and food piping |
|
7801 |
VALFLON Expansion Joint |
A version of No.7800 equipped with flanges at both ends |
Used as expansion joint for connecting PTFE-lined, glass-lined, and carbon-lined steel pipes. |
|
7803‐1 7803‐2 7803‐3 7803‐4 |
VALFLON Expansion Joint (Molded) |
Bellows formed from PTFE hose.
No.7803-1:basic
No.7803-2:basic, with control ring
No.7803-3:with outer jacket
No.7803-4:thick-wall type |
Used as pipe fittings to absorb dislocation of pipes
No.7803-1:for general use
No.7803-2:for general use, with control ring
No.7803-3:for heat resistance and pressure resistance
No.7803-4:for pressure resistance and vacuum |
|
7806‐1 7806‐2 7806‐3 |
VALFLON Expansion Joint (Metal Jacketed) |
PTFE molded bellows, coated with thin metallic sheet.
No.7806-1…with sleeve
No.7806-2…without sleeve
No.7806-3…without sleeve, with inner rings |
Used as pipe fitting that requires pressure resistance or heat resistance. 7806-3 is suitable for vacuum. |
|
7FR52 |
Lining Tank |
This product is formed by bonding a lining sheet to a lined metal or FRP object, welding the seam of the sheet, then applying a protective lining to the wetted area. |
It can be used with chemical products of all types, such as strong acid, mixed acid, and alkali solvent. |
|