VALQUA, LTD.

Seal Products

Detail:Detail Download:Download
VALQUA No. Product Name Description Application Detail
(3DW) Dynamic Bellows (V Series) Standard metal welded bellows consisting of desired number of blocks with a free length of 10 mm to ensure ease of use depending on the required amount of expansion. Used in a variety of equipment based on a combination of standard size and number of blocks.

Pressure range :
Differential pressure 0.098MPa {1kgf/cm2}

Manufacturing range :
Inside diameter: 8-210mm dia.
Standard material :
SUS304 (Substandard SUS316L)
(3DW) Dynamic Bellows (M Series) Metal welded bellows that have been developed using structural analysis technology and offer a long service life at a low cost. Used in drive seals for vacuum equipment, semiconductor production equipment and bellows cylinders, bellows pumps and manipulators.

Standard dimension :
Inside diameter: 8-50mm dia.
Standard material :
SUS316L
- GYLON This gasket was developed by Garlock. “GYLON” gaskets developed by Garlock are extremely capable seal materials. In addition to exceptional chemical resistance, GYLON’s flexibility allows it to demonstrate high sealability in a variety of conditions—from extremely low temperatures to high temperature/high pressure conditions.
- Gland Packing “#1298” “#1298” gland packing is formed by braiding an outer jacket out of Inconel wire-reinforced PBI yarn around an interlock braided carbon yarn core. It is suitable for applications requiring both toughness and flexibility, and is used mainly as a high temperature/high pressure valve.
- Klozure Oil Seal Klozure Oil Seal was independently developed for each rotating shaft application, to maintain lubricant, prevent contamination, and help in fluid release. It helps machinery to move continuously, and reduces maintenance costs. It is used in various rotation shaft applications.
- Gland Packing “#5000” Unlike traditional carbon packing, “#5000” does not contaminate fluids. Durable even in severe usage conditions, this long-lasting packing offers both toughness and flexibility.
- Gland Packing “#1925” “#1925” is formed by combining our internally developed Synthepak yarn with patented fiber-injected PTFE yarn. It offers flexibility, abrasion resistance, and chemical resistance—all at a reasonable price.
1110 Aluminum Foil Spiral Packing Aluminum ribbon, impregnated with lubricant, then braided into a spiral shape Used as valve stem seal for hot oil, heat medium oil, steam, organic solvent, etc. Normally used as packing for header of VF-10 and VF-20.

Temperature limit : 350℃
詳細
2010 Synthetic Rubber Sheet Gasket No.2000 gasket processed into a specified flat shape Used for low-pressure, such as cold water, hot water, sea water, and air 詳細 PDFリンク
2045 INFLATE Seal This hollow gasket is created from cloth-reinforced rubber, or from a single piece of rubber. It is sealed by supplying air or the like to the hollow portion, causing it to expand. It is used for sealing vacuum vessels, airtight doors, etc.
2060 Synthetic Rubber Packing Synthetic rubber molded into specified shape and size. Used as seal and equipment parts. 詳細
2060 Synthetic Rubber Packing Side U-A・B Shape This product is molded from synthetic rubber into specified shapes. It is used as various seals and machinery parts. 詳細
2060-CPC Cushion Packing This product is molded from synthetic rubber into specified shapes. It is used as various seals and machinery parts. 詳細
2060-CPF Cushion Packing This product is molded from synthetic rubber into specified shapes. It is used as various seals and machinery parts. 詳細
2060-D
(EPDM)
Synthetic Rubber Packing (For Pistons) Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-D
(EPDM)
Synthetic Rubber Packing (For Rods) Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-D
(HNBR)
Synthetic Rubber Packing (For Pistons) Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-D
(HNBR)
Synthetic Rubber Packing (For Rods) Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-D
(NBR)
Synthetic Rubber Packing (For Pistons) Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-D
(NBR)
Synthetic Rubber Packing (For Rods) Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-DHS Dust Seal This product is formed by molding nitrile rubber into a sealing lip shape with both a duster lip and oil lip. This packing is used for various types of hydraulic machinery operating from -20 to 80°C. It is especially suitable for locations requiring high-pressure and abrasion-resistant properties. 詳細
2060-DRL
(NBR)
Dust Seal Molded Packing Custom-Made This product is formed by molding nitrile rubber into a sealing lip shape with a duster lip only. This packing is used for various types of hydraulic machinery operating from -30 to 80°C. It is especially suitable for locations requiring high-pressure and abrasion-resistant properties. 詳細
2060-DSB
(NBR)
Dust Seal Molded Packing Custom-Made This product is formed by molding nitrile rubber into a sealing lip shape with both a duster lip and oil lip, and attaching metal parts. This packing is used for various types of hydraulic machinery operating from -20 to 80°C. It is especially suitable for locations requiring high-pressure and abrasion-resistant properties. 詳細
2060-DSL
(NBR)
Dust Seal Molded Packing Custom-Made This product is formed by molding nitrile rubber into a sealing lip shape with a duster lip only, and attaching metal parts. This packing is used for various types of hydraulic machinery operating from -30 to 80°C. It is especially suitable for locations requiring high-pressure and abrasion-resistant properties. 詳細
2060-LIP Synthetic Rubber Packing LIP This product is injection-molded from synthetic rubber into specified shapes. It is used as various seals and machinery parts. 詳細
2060-MLP
(EPDM)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-MLP
(HNBR)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-MLP
(NBR)
Synthetic Rubber Packing U-Packing This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-MLR
(EPDM)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-MLR
(HNBR)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-MLR
(NBR)
Synthetic Rubber Packing U-Packing This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-MPP Synthetic Rubber Packing U-Packing This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-MPR Synthetic Rubber Packing U-Packing This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-PSP One Ring Packing This product is molded from synthetic rubber into specified shapes. It is used as various seals and machinery parts. 詳細
2060-PUD One Ring Packing This product is molded from synthetic rubber into specified shapes. It is used as various seals and machinery parts. 詳細
2060-PWP One Ring Packing This product is molded from synthetic rubber into specified shapes. It is used as various seals and machinery parts. 詳細
2060-PWP
(HNBR)
One Ring Packing Custom-Made This product is molded from synthetic rubber into specified shapes. It is used as various seals and machinery parts. 詳細
2060-PWP
(NBR)
One Ring Packing Custom-Made This product is molded from synthetic rubber into specified shapes. It is used as various seals and machinery parts. 詳細
2060-SOD Synthetic Rubber Packing SOD Shape This product is molded from synthetic rubber into specified shapes. It is used as various seals and machinery parts. 詳細
2060-T Synthetic Rubber Packing (For Pistons) Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-T Synthetic Rubber Packing (For Rods) Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UHP
(EPDM)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UHP
(HNBR)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UHP
(NBR)
Synthetic Rubber Packing U-Packing This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UHR
(EPDM)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UHR
(HNBR)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UHR
(NBR)
Synthetic Rubber Packing U-Packing This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UHS Synthetic Rubber Packing U-Packing This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UHS
(EPDM)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UHS
(HNBR)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UNP
(HNBR)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UNP
(NBR)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UNR
(HNBR)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UNR
(NBR)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UNS
(HNBR)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UNS
(NBR)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UP
(EPDM)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UP
(HNBR)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UP
(NBR)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UPP Synthetic Rubber Packing U-Packing This product is formed by molding synthetic rubber into a ring shape with a U-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UPP
(EPDM)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UPP
(HNBR)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UPR Synthetic Rubber Packing U-Packing This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UPR
(EPDM)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060-UPR
(HNBR)
Synthetic Rubber Packing U-Packing Custom-Made This product is formed by molding synthetic rubber into a ring shape with a U, J, and L-shaped cross section. It allows for rubber compounding that matches the usage temperature or fluid. It is used as a seal for various types of hydraulic/pneumatic machinery such as cylinders, presses, jacks, and electromagnetic valves. 詳細
2060
5060
Sanitary Gasket Gasket made of synthetic rubber (EPDM, FKM, VMQ) molded into gasket, complying with Food Hygiene Law. Used as gasket for sanitary pipe fittings PDFリンク
2560-WSJ Willson Seal Custom-Made This product combines a synthetic rubber seal lip with a metal adapter spacer. It is used as a vacuum seal for rotating shafts with significant runout. 詳細
2560-WSK Willson Seal Custom-Made This product combines a synthetic rubber seal lip with a metal adapter spacer. It is used as a vacuum seal for rotating shafts with significant runout. 詳細
2560-WSP Willson Seal Custom-Made This product combines a synthetic rubber seal lip with a metal adapter spacer. It is used as a vacuum seal for rotating shafts with significant runout. 詳細
2560-WSV Willson Seal Custom-Made This product combines a synthetic rubber seal lip with a metal adapter spacer. It is used as a vacuum seal for rotating shafts with significant runout. 詳細
2620 Cloth and Synthetic Rubber Autopack Ring Packing Synthetic-rubber-lined cloths pasted together and molded into specified shape and size Used as seal for rod or plunger handling cold and hot water or sea water 詳細
2625 Cloth and Synthetic Rubber Miscellaneous Packing Synthetic-rubber-lined cloths pasted together and molded into specified shape and size. Available are packings of U, J, and L-shaped cross section. Used as seal for ram, piston, rod or plunger handling water or oil
2630-VNF Cloth and Synthetic Rubber V-packing This product is created by pasting synthetic-rubber-lined cloths together, then molding them into a ring shape with a V-shaped cross section. It is mainly used as sealant for hydraulic/pneumatic machinery. 詳細
2630-VNV Cloth and Synthetic Rubber V-packing This product is created by pasting synthetic-rubber-lined cloths together, then molding them into a ring shape with a V-shaped cross section. It is mainly used as sealant for hydraulic/pneumatic machinery. 詳細
2631-VGH Synthetic Rubber V-packing This product is formed by molding synthetic rubber into a ring shape with a V-shaped cross section. It is mainly used as sealant for hydraulic/pneumatic machinery. 詳細
2632-MV MV-packing Composite seal combining No.2630 and special synthetic rubber molded into U-shaped cross section ring High-performance composite seal is suitable for sealing injection molding hydraulic cylinder, hydraulic press, etc. Groove for V-packing (No.2630, 2631) can be used as it is. 詳細
2650 Synthetic Rubber Oil Seal Seal with synthetic-rubber seal lip, and with metal reinforcing ring attached to the periphery Used as rotating shaft seal for water, oil, gasoline, alcohol, etc.
2810 Synthetic Rubber Diaphragm Synthetic rubber or cloth-reinforced synthetic rubber, molded into specified shape and size. Variations with baked PTFE for improved pressure and chemical resistance are also available. Used as seal for pumps and valves
3640 Metal Hollow O-ring (basic design) O-ring made of metal pipe processed into ring, with metal plating or other costing if required Used for aerospace semiconductor-related facilities, nuclear power-related facilities, electronic industry, laser equipment, joints, valves, injection molding machines, etc. 詳細 PDFリンク
3641 Metal Hollow Oring No.3640 O-ring provided with vent hole inside (for inner pressure) or outside (for outer pressure) for balancing Used for aerospace semiconductor-related facilities, nuclear power-related facilities, electronic industry, laser equipment, joints, valves, injection molding machines, etc. 詳細 PDFリンク
3645 Trypack Flat, Double-Covered Product This metal C-ring is made of a coil spring as an elastic element, which is covered twice with a thin metallic sheet such as aluminum sheet. It is used as a gasket for vacuums and ultrahigh vacuums. It is used with seals around used nuclear material storage cask lids, etc. 詳細 PDFリンク
3645 Trypack Single-Covered Product This metal C-ring is made of a coil spring as an elastic element, which is covered with a thin metallic sheet such as aluminum sheet. It is used as a gasket for vacuums and ultrahigh vacuums. It is used with seals around used nuclear material storage cask lids, etc. 詳細 PDFリンク
3645 Trypack Flat, Double-Covered Product (Split Inner Layer Type) This metal C-ring with a split inner layer is made of a coil spring as an elastic element, which is covered twice with a thin metallic sheet such as aluminum sheet. It is used as a gasket for vacuums and ultrahigh vacuums. It is used with seals around used nuclear material storage cask lids, etc. 詳細 PDFリンク
3645LS Trypack Flat, Double-Covered Product, Double Layered Product This gasket with improved conformity to the sealing surface takes the traditional Trypack design and adds V-shaped grooves to the upper and lower sealing surfaces to achieve a specified airtightness, even under a low tightening load. It is used as a gasket for vacuums and ultrahigh vacuums. It is used with seals around used nuclear material storage cask lids, etc. 詳細 PDFリンク
4010 Fluoro Rubber Sheet Gasket No.4000 gasket processed into a specified flat shape Used for pipe flange, joint or cover of equipment and machinery, handling inorganic acid, fuel oil, aromatic solvent, etc.

Temperature from : -15 to +200℃
詳細 PDFリンク
4045 INFLATE Seal This hollow gasket is created from cloth-reinforced rubber, or from a single piece of rubber. It is sealed by supplying air or the like to the hollow portion, causing it to expand. It is used for sealing vacuum vessels, airtight doors, etc.
4060 Fluoro Rubber Packing Fluororubber molded into specified shape and size Used as various seals or machine parts. 詳細
4060 Fluoro Rubber Packing Side U-A・B Shape This product is molded from fluoro rubber into specified shapes. It is used as various seals and machinery parts. 詳細
4060-D
(FKM)
Fluoro Rubber Packing (For Pistons) Custom-Made This product is formed by molding fluoro rubber into a ring shape with a U, J, and L-shaped cross section. It is used as a seal for hydraulic/pneumatic machinery that requires heat/acid/solvent resistance. 詳細
4060-D
(FKM)
Fluoro Rubber Packing (For Rods) Custom-Made This product is formed by molding fluoro rubber into a ring shape with a U, J, and L-shaped cross section. It is used as a seal for hydraulic/pneumatic machinery that requires heat/acid/solvent resistance. 詳細
4060-DHS Dust Seal This product is formed by molding fluoro rubber into a sealing lip shape with both a duster lip and oil lip. This packing is used for various types of hydraulic machinery operating from -20 to 80°C. It is especially suitable for locations requiring high-pressure and abrasion-resistant properties. 詳細
4060-DRL
(FKM)
Dust Seal Molded Packing Custom-Made This product is formed by molding fluoro rubber into a sealing lip shape with a duster lip only. This packing is used for various types of hydraulic machinery operating from -10 to 150°C. It is especially suitable for locations requiring high-pressure and abrasion-resistant properties. 詳細
4060-DSB
(FKM)
Dust Seal Molded Packing Custom-Made This product is formed by molding fluoro rubber into a sealing lip shape with both a duster lip and oil lip, and attaching metal parts. This packing is used for various types of hydraulic machinery operating from -20 to 80°C. It is especially suitable for locations requiring high-pressure and abrasion-resistant properties. 詳細
4060-DSL
(FKM)
Dust Seal Molded Packing Custom-Made This product is formed by molding fluoro rubber into a sealing lip shape with a duster lip only, and attaching metal parts. This packing is used for various types of hydraulic machinery operating from -10 to 150°C. It is especially suitable for locations requiring high-pressure and abrasion-resistant properties. 詳細
4060-LIP Fluoro Rubber Packing LIP This product is molded from fluoro rubber into specified shapes. It is used as various seals and machinery parts. 詳細
4060-MLP Fluoro Rubber Packing U-Packing This product is formed by molding fluoro rubber into a ring shape with a U, J, and L-shaped cross section. It is used as a seal for pneumatic machinery that requires heat/acid/solvent resistance. 詳細
4060-MLR Fluoro Rubber Packing U-Packing This product is formed by molding fluoro rubber into a ring shape with a U, J, and L-shaped cross section. It is used as a seal for pneumatic machinery that requires heat/acid/solvent resistance. 詳細
4060-PSP
(FKM)
One Ring Packing Custom-Made This product is molded from fluoro rubber into specified shapes. It is used as various seals and machinery parts. 詳細
4060-PWP
(FKM)
One Ring Packing Custom-Made This product is molded from fluoro rubber into specified shapes. It is used as various seals and machinery parts. 詳細
4060-SOD Fluoro Rubber Packing SOD Shape This product is molded from fluoro rubber into specified shapes. It is used as various seals and machinery parts. 詳細
4060-T Fluoro Rubber Packing (For Pistons) Custom-Made This product is formed by molding fluoro rubber into a ring shape with a U, J, and L-shaped cross section. It is used as a seal for hydraulic/pneumatic machinery that requires heat/acid/solvent resistance. 詳細
4060-T Fluoro Rubber Packing (For Rods) Custom-Made This product is formed by molding fluoro rubber into a ring shape with a U, J, and L-shaped cross section. It is used as a seal for hydraulic/pneumatic machinery that requires heat/acid/solvent resistance. 詳細
4060-UHP Fluoro Rubber Packing U-Packing This product is formed by molding fluoro rubber into a ring shape with a U, J, and L-shaped cross section. It is used as a seal for pneumatic machinery that requires heat/acid/solvent resistance. 詳細
4060-UHR Fluoro Rubber Packing U-Packing This product is formed by molding fluoro rubber into a ring shape with a U, J, and L-shaped cross section. It is used as a seal for pneumatic machinery that requires heat/acid/solvent resistance. 詳細
4060-UHS Fluoro Rubber Packing U-Packing This product is formed by molding fluoro rubber into a ring shape with a U, J, and L-shaped cross section. It is used as a seal for pneumatic machinery that requires heat/acid/solvent resistance. 詳細
4060-UHS
(FKM)
Fluoro Rubber Packing U-Packing Custom-Made This product is formed by molding fluoro rubber into a ring shape with a U, J, and L-shaped cross section. It is used as a seal for pneumatic machinery that requires heat/acid/solvent resistance. 詳細
4060-UNP Fluoro Rubber Packing U-Packing Custom-Made This product is formed by molding fluoro rubber into a ring shape with a U, J, and L-shaped cross section. It is used as a seal for pneumatic machinery that requires heat/acid/solvent resistance. 詳細
4060-UNR Fluoro Rubber Packing U-Packing Custom-Made This product is formed by molding fluoro rubber into a ring shape with a U, J, and L-shaped cross section. It is used as a seal for pneumatic machinery that requires heat/acid/solvent resistance. 詳細
4060-UNS Fluoro Rubber Packing U-Packing Custom-Made This product is formed by molding fluoro rubber into a ring shape with a U, J, and L-shaped cross section. It is used as a seal for pneumatic machinery that requires heat/acid/solvent resistance. 詳細
4060-UP Fluoro Rubber Packing U-Packing Custom-Made This product is formed by molding fluoro rubber into a ring shape with a U, J, and L-shaped cross section. It is used as a seal for hydraulic/pneumatic machinery that requires heat/acid/solvent resistance. 詳細
4060-UPP Fluoro Rubber Packing U-Packing Custom-Made This product is formed by molding fluoro rubber into a ring shape with a U, J, and L-shaped cross section. It is used as a seal for pneumatic machinery that requires heat/acid/solvent resistance. 詳細
4060-UPR Fluoro Rubber Packing U-Packing Custom-Made This product is formed by molding fluoro rubber into a ring shape with a U, J, and L-shaped cross section. It is used as a seal for pneumatic machinery that requires heat/acid/solvent resistance. 詳細
432 Wear Ring This product is formed by molding cloth-reinforced phenol resin into specified shapes. This piston pin bearing is effective in stabilizing shafts. It is used with slipper seals, U-packing, etc. 詳細
4560-WSJ Willson Seal This product combines a fluoro rubber seal lip and metal adapter spacer. It is used as a vacuum seal for rotating shafts with significant runout. 詳細
4560-WSK Willson Seal This product combines a fluoro rubber seal lip and metal adapter spacer. It is used as a vacuum seal for rotating shafts with significant runout. 詳細
4560-WSP Willson Seal This product combines a fluoro rubber seal lip and metal adapter spacer. It is used as a vacuum seal for rotating shafts with significant runout. 詳細
4560-WSV Willson Seal This product combines a fluoro rubber seal lip and metal adapter spacer. It is used as a vacuum seal for rotating shafts with significant runout. 詳細
4625 Cloth and Fluoro Rubber Miscellaneous Packing Fluororubber-lined cloths pasted together and molded into specified shape and size. Available are packings of U, J, and L-shaped cross section. Used as seal for ram, piston, rod or plunger handling hot oil, chemicals or solvent B
4630-VNF Cloth and Fluoro Rubber V-packing This product is created by pasting fluoro rubber-lined cloths together, then molding them into a ring shape with a V-shaped cross section. It is used as a seal for hydraulic/pneumatic machinery that requires heat/chemical/solvent resistance. 詳細
4630-VNV Cloth and Fluoro Rubber V-packing This product is created by pasting fluoro rubber-lined cloths together, then molding them into a ring shape with a V-shaped cross section. It is used as a seal for hydraulic/pneumatic machinery that requires heat/chemical/solvent resistance. 詳細
4631-VGH Fluoro Rubber V-packing This product is formed by molding fluoro rubber into a ring shape with a V-shaped cross section. It is used as a seal for hydraulic/pneumatic machinery that requires heat/chemical/solvent resistance. 詳細
4632MV MV-packing This composite seal combines No.2630 and fluoro rubber, molded into a ring shape with a U-shaped cross section. It is used as a hydraulic high-performance composite seal for injection molding hydraulic cylinders, hydraulic presses, etc. Grooves for V-packing (No.2630, 2631) can be used as is. 詳細
4640 Fluoro Rubber O-ring Static Application This product is formed by molding fluoro rubber into a ring shape with an O-shaped cross section. We also offer O-rings of various colors including white and brown. It is used as a seal for machinery that requires heat/chemical/oil resistance. 詳細
4640 Fluoro Rubber O-ring Dynamic Application This product is formed by molding fluoro rubber into a ring shape with an O-shaped cross section. We also offer O-rings of various colors including white and brown. It is used as a seal for machinery that requires heat/chemical/oil resistance. 詳細
4641 Fluoro Rubber X-ring Fluoro rubber molded into X-shaped cross section ring Used as seal for rotating shaft that needs chemical and heat resistance 詳細
4650 Fluoro Rubber Oil Seal Seal with fluororubber seal-lip, and with metal reinforcing ring attached to the periphery Used as a seal for rotation shafts that require resistance to heat and solvents.
4810 Fluoro Rubber Diaphragm Fluororubber or cloth-reinforced fluororubber, molded into specified shape and size Fluororubber or cloth-reinforced fluororubber, molded into specified shape and size Used as seal for valves and pumps that require chemical or solvent resistance
5 Gasket Paste No.5 Black paste(No.5), containing graphite corpuscle compounded with oil-soluble adhesive. White paste containing corpuscle (No.5M) is also available. Sealing additive for gasket for joints, handling water fluid, acid, alkali, salt solution, alcohol, etc. Improved sealing performance and detachability.

Temperature limit : 200℃
詳細 PDFリンク
5010 Silicone Rubber Sheet Gasket No.5000 gasket processed into a specified flat shape Used at wide temperature range.

Temperature from : -60 to +200℃
詳細 PDFリンク
5045 INFLATE Seal This hollow gasket is created from cloth-reinforced rubber, or from a single piece of rubber. It is sealed by supplying air or the like to the hollow portion, causing it to expand. It is used for sealing vacuum vessels, airtight doors, etc.
5060 Silicone Rubber Packing Silicone rubber molded into a specified shape Used as heat-resisting electric-insulating packing and gasket for -60 to +250℃ 詳細
5060 Silicone Rubber Packing Side U-A・B Shape This product is molded from silicone rubber into specified shapes. It is used as a heat-resistant/electric-insulating packing/gasket for use in temperatures ranging from -60 to 250°C. 詳細
5060-LIP Silicone Rubber Packing LIP This product is molded from silicone rubber into specified shapes. It is used as a heat-resistant/electric-insulating packing/gasket for use in temperatures ranging from -60 to 250°C. 詳細
5060-SOD Silicone Rubber Packing SOD Shape This product is molded from silicone rubber into specified shapes. It is used as a heat-resistant/electric-insulating packing/gasket for use in temperatures ranging from -60 to 250°C. 詳細
540 Series Serrated Gasket This gasket is made of metal sheet grooved concentrically with a saw-tooth cross section, and is processed into a specified flat shape. It is used as a gasket for pressurized containers, towers, tanks, valve bonnets, pipe flanges, etc. 詳細 PDFリンク
550-ZA Ring Joint Gasket (API-RX) This gasket is used for oil drilling and other applications that requires pressure resistance, thanks to its octagonal shape. It is used as a gasket in high pressure joints, such as in oil drilling equipment. 詳細 PDFリンク
550-ZB Improved Bridgeman Gasket (Wedge) This unique self-seal type gasket applies Bridgeman’s “Principle of Unsupported Area” to use the pressure applied to the edge face of the floating head to increase tension force. It is often used as a gasket for high temperature/high pressure valve bonnets (9.8 MPa or higher), heat exchangers, autoclave cover packing, etc. 詳細 PDFリンク
550-ZD Delta Ring (Triangle) This self-seal type gasket has a triangular cross section, and is used for pressurized container covers and valve bonnets up to 343 MPa. It is used as a cover gasket for high temperature/high pressure autoclaves and heat exchangers, or as a gasket for valve bonnets. 詳細 PDFリンク
550-ZE Diamond Shaped Ring This comparatively small metal ring has a diamond shaped cross section, and is often used in locations such as nipples that are tightened with screwing force. It is used as a gasket for high temperature/high pressure pressure gauge installations, nipple type joints, etc. 詳細 PDFリンク
550-ZL Lens Ring (Lens) This gasket has a cross section similar to a convex lens. It is self-sealing as it is wedged between flanges formed into a cone shape with a 20° angle and sealed with line contact. It is used as a gasket for high temperature/high pressure ammonia methanol synthesis line pipe flanges, pressurized containers, 294 MPa high pressure method polyethylene polymerization lines, etc. 詳細 PDFリンク
550-ZO Ring Joint Gasket (Oval) This metallic ring is formed by processing the cross section of a metallic material into an oval shape. Its dimensions and materials are based on JPI-7S-23 or ASMEB1620. It is often used as a gasket for pipe flanges, pressurized containers, towers, tanks, valve bonnets, etc., that handle high temperature/high pressure steam, gas, oil, solvent, etc., in oil refining/chemicals, electricity, ships, etc. 詳細 PDFリンク
550-ZP Ring Joint Gasket (API-BX) This gasket is used for oil drilling and other applications that requires pressure resistance, thanks to its octagonal shape. It is used as a gasket in high pressure joints, such as in oil drilling equipment. 詳細 PDFリンク
550-ZR Circle Shaped Metal Gasket (Circle) This gasket has a round-shaped cross section, and is used for high pressure joints with comparatively small dimensions. It is used as a gasket for valve bonnets, compressors, vacuum pumps, reactors, high pressure unions, nipples, etc. 詳細 PDFリンク
550-ZS Ring Joint Gasket (Octagonal) This metallic ring is formed by processing the cross section of a metallic material into an octagonal shape. Its dimensions and materials are based on JPI-7S-23 or ASMEB1620. It is often used as a gasket for pipe flanges, pressurized containers, towers, tanks, valve bonnets, etc., that handle high temperature/high pressure steam, gas, oil, solvent, etc., in oil refining/chemicals, electricity, ships, etc. 詳細 PDFリンク
550-ZW Double Cone Shaped Gasket (Double Cone) This self-sealing gasket has a double cone cross section. It is often used by wedging an aluminum board or graphite tape between it and extremely soft iron, then sealing. In addition to reducing the amount of precision work, this causes no damage to the seal surface. It is used as a gasket for high temperature/high pressure tank heat exchanger covers. 詳細 PDFリンク
5560-WSJ Willson Seal Custom-Made This product combines a silicone rubber seal lip with a metal adapter spacer. It is used as a vacuum seal for rotating shafts with significant runout. 詳細
5560-WSK Willson Seal Custom-Made This product combines a silicone rubber seal lip with a metal adapter spacer. It is used as a vacuum seal for rotating shafts with significant runout. 詳細
5560-WSP Willson Seal Custom-Made This product combines a silicone rubber seal lip with a metal adapter spacer. It is used as a vacuum seal for rotating shafts with significant runout. 詳細
5560-WSV Willson Seal Custom-Made This product combines a silicone rubber seal lip with a metal adapter spacer. It is used as a vacuum seal for rotating shafts with significant runout. 詳細
560 Series Metal Flat Gasket This gasket is made of various metal sheets and is processed into a specified flat shape. It is used in heat exchangers, autoclaves, valve bonnets, pipe flanges, etc. 詳細 PDFリンク
5640 Silicone Rubber O-ring Static Application This product is formed by molding silicone rubber into a ring shape with an O-shaped cross section. It is used as a static application seal that requires a wide range of temperatures, from low to high. 詳細
5640 Silicone Rubber O-ring Dynamic Application This product is formed by molding silicone rubber into a ring shape with an O-shaped cross section. It is used as a static application seal that requires a wide range of temperatures, from low to high. 詳細
5650 Silicone Rubber Oil seal It has a seal lip made of silicone rubber with metal reinforcing ring attached along the circumference. Used as a seal for rotation shafts that require resistance to heat and solvents.
5810 Silicone Rubber Diaphragm Silicone rubber or cloth-reinforced Silicone rubber molded into specified shape and size Diaphragm with superior heat-resistance
5M Gasket Paste No.5M Black paste(No.5), containing graphite corpuscle compounded with oil-soluble adhesive. White paste containing corpuscle (No.5M) is also available. Sealing additive for gasket for joints, handling water fluid, acid, alkali, salt solution, alcohol, etc. Improved sealing performance and detachability.

Temperature limit : 200℃
詳細 PDFリンク
6 Gasket Paste No.6 Black paste(No.6), containing graphite corpuscle compounded with water-soluble adhesive. White paste containing corpuscle (No.6M) is also available. Sealing additive for gasket for joints, handling water petroleum oil, oil gas, solvent, solvent vapor, LNG, general gases, etc. Improved sealing performance and detachability.

Temperature limit : 900℃
詳細 PDFリンク
6201 Carbonized Fiber Coil Packing Coil packing of carbon fiberyarn, processed with PTFE dispersion and lubricating oil, then braided into square cross section and finished with PTFE, fine graphite and lubricating oil Used as seal for rotary shaft treating industrial water, urban drainage, animal/plant/mineral oil, weak acid, weak alkali, etc.
Temperature limit :200℃
詳細
6232 Carbon Fiber Coil Packing Coil packing of carbon fiber yarn, processed with PTFE dispersion and lubricating oil, then braided into square cross section and finished with PTFE, fine graphite and lubricating oil Used as seal for valves and rotary shaft treating industrial water, animal/plant/mineral oil, powder, gas strong acid (except oxidative acid), etc.
Temperature limit :260℃
詳細
6234 PTFE-Coated Carbonized Fiber Coil packing made of carbon fiberyarn covered with PTFE film, braided into square cross-section and finished with PTFE, special lubricant and lubricating oil after treatment with PTFE dispersion. Used as seal for rotation shafts for industrial water, municipal waste water, animal fats, vegetable oil and mineral oil, acid and weak alkali.
Temperature limit :200℃
詳細
6262 Carbon Fiber Coil Packing Coil packing of carbon fiber yarn, processed with PTFE dispersion and lubricating oil, then braided into square cross section and finished with PTFE, fine graphite and lubricating oil Used as seal for rotary pump shaft treating industrial water, salt solutions, strong alkali, strong acid (except oxidative acid), etc. Applicable to rotary machine shaft depending on operating conditions.
Temperature limit :260℃
詳細
6267 Carbon Fiber Coil Packing Coil packing of carbon fiber yarn, processed with graphite, then braided into square cross section and finished with graphite Packing exclusive for headed ring. Normally used with No.VF-10, VF-20, etc. as shaft seal for valves for water/oil fluid, non-combustible/combustible gases, liquefied gas, etc.
Temperature limit :350℃
詳細
6345 Carbon Fiber Coil Packing Coil packing of high-grade carbon fiberyarn, processed with graphite, then braided into square cross section and finished with graphite Used as seal for joint of exhaust heat duct of boiler/turbine, door part of damper and dryer, manhole etc.
Temperature limit :750 ℃(400℃ in the air)
詳細
6399 Carbon Fiber Coil Packing Coil packing of high-tension carbon fiber yarn, processed with PTFE dispersion, then braided into square cross section and finished with PTFE and fine graphite (6399L processed with lubricant) Used as seal for reciprocating machine shaft for water/oil fluid, solvent vapor, etc. and for valve stem.
Temperature limit :300℃ (260℃ for No.6399L)
詳細
6399H Carbon Fiber Ring Packing No.6399 molded tight into jointless ring packing of specified size Used as seal for reciprocating machine shaft for water/oil fluid, solvent vapor, etc. and for valve stem, normally as header ring of No.6399 and No.8201. Can be used also as header ring of valve stem seal.
Temperature limit :300℃
詳細
6399L Carbon Fiber Coil Packing Coil packing of high-tension carbon fiber yarn, processed with PTFE dispersion, then braided into square cross section and finished with PTFE and fine graphite (6399L processed with lubricant) Used as seal for reciprocating machine shaft for water/oil fluid, solvent vapor, etc. and for valve stem.
Temperature limit :300℃ (260℃ for No.6399L)
詳細
640 Synthetic Rubber O-ring Static Application This product is formed by molding synthetic rubber into a ring shape with an O-shaped cross section. We also offer low-friction lubricant rubber material. The structure is simple and the seal has no directionality, so it can be used under a wide range of pressures as a static application gasket or dynamic application packing for machinery. 詳細
640 Synthetic Rubber O-ring Dynamic Application This product is formed by molding synthetic rubber into a ring shape with an O-shaped cross section. We also offer low-friction lubricant rubber material. The structure is simple and the seal has no directionality, so it can be used under a wide range of pressures as a static application gasket or dynamic application packing for machinery. 詳細
641
(EPDM)
Synthetic Rubber X-ring Synthetic rubber molded into X-shaped cross section ring Seal for rotating shaft of machinery. 詳細
641
(HNBR)
Synthetic Rubber X-ring Synthetic rubber molded into X-shaped cross section ring Seal for rotating shaft of machinery. 詳細
641
(NBR)
Synthetic Rubber X-ring Synthetic rubber molded into X-shaped cross section ring Seal for rotating shaft of machinery. 詳細
6500 Compressed Non-Asbestos Sheet Non-asbestos fiber mixed with heat/chemical resisting rubber binder, then rolled and vulcanized Used as pipe flange and gasket for equipment in various industries.

Temperature range : -50 to +183℃
詳細 PDFリンク
6500AC Compressed Non-Asbestos Sheet Anticorrosion Type Version of No.6500 with anticorrosion treatment and antistick treatment. Used as gasket for stainless steel pipe flange and as gasket for equipment joint, cover, etc. Stainless steel corrosion inhibition is expected.

Temperature range : -50 to +183℃
詳細 PDFリンク
6502 BLACK SUPER High heat and steam resistant Non-asbestos joint sheet that inhibits hardening caused by heat deterioration, by blending highly heat resistant, special rubber binder. Made of heat resistant, artificial inorganic and carbon fibers as well as the minimum amount of organic fibers required. It has excellent sealing characteristics due to its smooth sheet surface and highly dense structure. Ideal for use as a joint surface gasket for pipe flanges, valve bonnets and covers for various industrial units that require heat resistance in petroleum refining, chemical and shipbuilding industries.

Temperature range : -50 to +214℃
詳細 PDFリンク
6503 Compressed Non-Asbestos Sheet Since black components are removed in the Compressed Fiber Sheet, these are suitable gaskets to be used for applications where inclusion of black foreign substances into the fluid should be avoided. Used as gasket for Tap water, industrial water, hot water, steam, drain air, as well as general gases.

Temperature range : -50 to +214℃
詳細 PDFリンク
6503AC Compressed Non-Asbestos Sheet Anticorrosion Type Version of No.6503 with anticorrosion treatment and antistick treatment. Used as gasket for stainless steel pipe flange and as gasket for equipment joint, cover, etc. Stainless steel corrosion inhibition is expected.

Temperature range : -50 to +214℃
詳細 PDFリンク
6510M Carbon Ring Carbon molded into specified shape and size Used as rod or piston packing or rider ring for oil-free compressor
6540H Series VF Serrated Gasket This product is created by machining a concentric groove with a special shaped saw-tooth cross section into a metal plate, then processing it into a specified flat shape. VALQUAFOIL sheet is attached to both the upper and lower surfaces for improved sealability. It is used as a gasket for heat exchangers, pressurized containers, towers, tanks, pipe flanges, etc. 詳細 PDFリンク
6540HP Compressed Fiber Sheet Substitute Serrated Metal Gasket with VALQUAFOIL Sheet Bonded The dimensions of this 6540H series piping product make it perfect as an alternative for joint sheets.
JIS 10K Max 600A
JPI class 150/300 Max 24B
It is used as a gasket for heat exchangers, pressurized containers, towers, tanks, pipe flanges, etc.
(6540HP is a piping product.)
詳細 PDFリンク
6560 Series Metal Flat Gasket with VALQUAFOIL Attached This flat gasket is made from a single piece of metal processed into a specified dimension and shape. Expanded graphite tape is attached to the surface to improve sealability. It is used in high temperature/high pressure steam and process line towers, tanks, heat exchangers, autoclaves, valve bonnets, etc. It can also be used in any raised face, grooved, or male-female joints. 詳細 PDFリンク
6590 BLACKTIGHT (Basic Design) It is used as a flange gasket for pipes, valve bonnets, pressurized containers, etc. for high temperature/high pressure steam, oil, petroleum gas, solvents, heating medium oil, etc. 詳細
6590VC BLACKTIGHT for Cryogenic Application (Basic Design) This gasket for cryogenic applications has a structure that offers even better flexibility than the 6590 series, for excellent sealability at even low surface pressures. It is used as a flange gasket for pipes, valve bonnets, pressurized containers, etc. for high temperature/high pressure steam, oil, petroleum gas, solvents, heating medium oil, etc. 詳細
6591 BLACKTIGHT (with Outer Ring) It is used as a flange gasket for pipes, valve bonnets, pressurized containers, etc. for high temperature/high pressure steam, oil, petroleum gas, solvents, heating medium oil, etc. 詳細
6591VC BLACKTIGHT for Cryogenic Application (with Outer Ring) This gasket for cryogenic applications (with outer ring) has a structure that offers even better flexibility than the 6590 series, for excellent sealability at even low surface pressures. It is used as a flange gasket for pipes, valve bonnets, pressurized containers, etc. for high temperature/high pressure steam, oil, petroleum gas, solvents, heating medium oil, etc. 詳細
6592 BLACKTIGHT (with Inner Ring) It is used as a flange gasket for pipes, valve bonnets, pressurized containers, etc. for high temperature/high pressure steam, oil, petroleum gas, solvents, heating medium oil, etc. 詳細
6592VC BLACKTIGHT for Cryogenic Application (with Inner Ring) This gasket for cryogenic applications (with inner ring) has a structure that offers even better flexibility than the 6590 series, for excellent sealability at even low surface pressures. It is used as a flange gasket for pipes, valve bonnets, pressurized containers, etc. for high temperature/high pressure steam, oil, petroleum gas, solvents, heating medium oil, etc. 詳細
6596 BLACKTIGHT (with Inner/Outer Ring) It is used as a flange gasket for pipes, valve bonnets, pressurized containers, etc. for high temperature/high pressure steam, oil, petroleum gas, solvents, heating medium oil, etc. 詳細
6596VC BLACKTIGHT for Cryogenic Application (with Inner/Outer Ring) This gasket for cryogenic applications (with inner/outer ring) has a structure that offers even better flexibility than the 6590 series, for excellent sealability at even low surface pressures. It is used as a flange gasket for pipes, valve bonnets, pressurized containers, etc. for high temperature/high pressure steam, oil, petroleum gas, solvents, heating medium oil, etc. 詳細
681 Oil Sheet Gasket Sheet gasket made of vegetable fiber and oil-resisting rubber Used as gasket for hydraulic pressure control of automatic transmission valve PDFリンク
681G Oil Sheet Gasket Sheet gasket made of vegetable fiber and oil- resisting rubber Gasket for Valve Body of AT mission. PDFリンク
681PG Oil Sheet Gasket / Adhesive Type This product is a single unit in which No.681G is attached to both sides of a metal separate plate. It is used as a gasket for AT mission valve body hydraulic control. PDFリンク

In this site, in order to understand the usage situation and improve the service,
We use cookies. For more information, please see our Privacy Policy.